How do i install linksys wireless router to pc connected to a cable modem?

I dont know much about computers, but when i try installing the linksys wirless router to my computer it says error 322. I tried lookin up solutions online but cant find any.Well maybe there is but i need step by step instructions on how to do it.My computer has windows xp.Also when i connect the router to the modem and computer i cannot load up any internet pages.Any help would be appreciated.How do i install linksys wireless router to pc connected to a cable modem?
dam homie i got the exact same problem. i called linksys, no good. went online to their chat support, no good. i finally decided to call someone. charged me $80 to install and set up all the security stuff, guy had like half an hour leftover so he threw in a free virus remover. now my pc is running better and i got my wireless connection up.





i highly suggest you just call a computer guy to come take care of the problem. i spent hours on this crap and couldnt get it, the guy took care of it in less than 1 hr. forget the headache and call someone.How do i install linksys wireless router to pc connected to a cable modem?
Set up a Linksys Wireless Router

Step 1

Choose and purchase a Linksys router, taking into account your budget and computing habits.

Step 2

Attach the antennas to the Linksys wireless router.

Step 3

Place the router in a central location, making sure it's not surrounded by metal. (A signal can't be obtained through metal.) The router should be located so that the distance between clients (computers) is somewhat equal. This will create a better connection.

Step 4

Plug the Ethernet cable into the ';Internet'; port on the back of the Linksys router.

Step 5

Connect a computer to the router by plugging another Ethernet cable into the Ethernet port on your computer and attaching the other end to one of the available ports on the back of the router. You can choose any port except the one labeled ';WAN.';

Step 6

Plug the router into an electrical outlet.

Step 7

Wait for the power light to stop flashing, at which time the router is finished booting up. While the router is booting, the power light will be blinking. This process may take a few minutes to complete.

Step 8

Reboot your computer so it can access a new IP address from the router through the Dynamic Host Configuration Protocol (DHCP).



Configure the Router

Step 1

Open your web browser, type '; http://192.168.1.1/ '; into the address bar and hit ';Enter.';

Step 2

Use ';Admin'; as the username in the pop-up box and leave the password blank.

Step 3

Connect to the Internet and click on ';Internet Setup.';

Step 4

Select your connection type from the drop-down menu. Choose ';DHCP'; for cable modems or ';PPPoE'; for most DSL modems. If you are unsure of these options, check with your ISP.

Step 5

Set a service set identifier (SSID) to identify the router and change the password.

Step 6

Encrypt your wireless connection using a Wireless Encryption Protocol (WEP) key. Under the ';Wireless Security'; option, enter a passphrase and click ';Generate.'; This will generate a password which will need to be used by any client connecting to your router.