I dont know much about computers, but when i try installing the linksys wirless router to my computer it says error 322. I tried lookin up solutions online but cant find any.Well maybe there is but i need step by step instructions on how to do it.My computer has windows xp.Also when i connect the router to the modem and computer i cannot load up any internet pages.Any help would be appreciated.How do i install linksys wireless router to pc connected to a cable modem?
dam homie i got the exact same problem. i called linksys, no good. went online to their chat support, no good. i finally decided to call someone. charged me $80 to install and set up all the security stuff, guy had like half an hour leftover so he threw in a free virus remover. now my pc is running better and i got my wireless connection up.
i highly suggest you just call a computer guy to come take care of the problem. i spent hours on this crap and couldnt get it, the guy took care of it in less than 1 hr. forget the headache and call someone.How do i install linksys wireless router to pc connected to a cable modem?
Set up a Linksys Wireless Router
Step 1
Choose and purchase a Linksys router, taking into account your budget and computing habits.
Step 2
Attach the antennas to the Linksys wireless router.
Step 3
Place the router in a central location, making sure it's not surrounded by metal. (A signal can't be obtained through metal.) The router should be located so that the distance between clients (computers) is somewhat equal. This will create a better connection.
Step 4
Plug the Ethernet cable into the ';Internet'; port on the back of the Linksys router.
Step 5
Connect a computer to the router by plugging another Ethernet cable into the Ethernet port on your computer and attaching the other end to one of the available ports on the back of the router. You can choose any port except the one labeled ';WAN.';
Step 6
Plug the router into an electrical outlet.
Step 7
Wait for the power light to stop flashing, at which time the router is finished booting up. While the router is booting, the power light will be blinking. This process may take a few minutes to complete.
Step 8
Reboot your computer so it can access a new IP address from the router through the Dynamic Host Configuration Protocol (DHCP).
Configure the Router
Step 1
Open your web browser, type '; http://192.168.1.1/ '; into the address bar and hit ';Enter.';
Step 2
Use ';Admin'; as the username in the pop-up box and leave the password blank.
Step 3
Connect to the Internet and click on ';Internet Setup.';
Step 4
Select your connection type from the drop-down menu. Choose ';DHCP'; for cable modems or ';PPPoE'; for most DSL modems. If you are unsure of these options, check with your ISP.
Step 5
Set a service set identifier (SSID) to identify the router and change the password.
Step 6
Encrypt your wireless connection using a Wireless Encryption Protocol (WEP) key. Under the ';Wireless Security'; option, enter a passphrase and click ';Generate.'; This will generate a password which will need to be used by any client connecting to your router.
Sunday, November 21, 2010
How do I connect to my router without going on the internet?
I may have messed up some of the properties on my router so now I can't get on to the internet, but if I was able to access my router I could change all that back. The problem is I can't access it without going on the internet, right? I think I changed the obtain ip address automatically to static ip address. Now I cannot connect to my normal network. Please help.How do I connect to my router without going on the internet?
You're a little confused.
Forget what you're thinking, because it's not the right way of thinking about it.
What you need to do is the following:
Find the little reset button on your router -- its probably on the back and you may need to use the point of a ball point pen to fit in the hole where the switch is located to push it.
Now, press and hold that reset button for about 30 seconds to reset your router back to factory defaults.
This is about the only way you're going to get back on to your router.
Good Luck!
Annorax64How do I connect to my router without going on the internet?
hiya no you have to be on the internet .. however the easiest way to sort things out is ring up your isp provider and ask them to reset your settings.. or we found that ringing up like netgear or belkini who ever made your router are more knowledable, we rang out telephone company and they were useless to be polite, we rang netgear in america local call from uk and they were brilliant.
You're a little confused.
Forget what you're thinking, because it's not the right way of thinking about it.
What you need to do is the following:
Find the little reset button on your router -- its probably on the back and you may need to use the point of a ball point pen to fit in the hole where the switch is located to push it.
Now, press and hold that reset button for about 30 seconds to reset your router back to factory defaults.
This is about the only way you're going to get back on to your router.
Good Luck!
Annorax64How do I connect to my router without going on the internet?
hiya no you have to be on the internet .. however the easiest way to sort things out is ring up your isp provider and ask them to reset your settings.. or we found that ringing up like netgear or belkini who ever made your router are more knowledable, we rang out telephone company and they were useless to be polite, we rang netgear in america local call from uk and they were brilliant.
How can I set up a router to automatically disconnect connections after so long?
I don't think that this feature is built into all routers, so if there is a recommended router to do the job, please let me know.How can I set up a router to automatically disconnect connections after so long?
I wonder ... if you set the timeout for the IP address to be given to the client. Then maybe set an option to not renew the IP. Theoretically that would work, so you could set the time for the IP address to be valid, and then it wouldn't automatically give them a new one. hmmmm .... I am sure there is another way.
ChadHow can I set up a router to automatically disconnect connections after so long?
Hmm.. I had the problem that my DSL Modem was left switched on all the time and everyday the router would stop responding because my ISP reset my connection..
I fixed it by getting one of those timers that turn power on and off, and setting it to switch the router off for a few mins in the middle of the night when I was asleep..
Timer 拢3 or new router 拢60!
Satisfaction at beating our ISP.. Priceless!
I wonder ... if you set the timeout for the IP address to be given to the client. Then maybe set an option to not renew the IP. Theoretically that would work, so you could set the time for the IP address to be valid, and then it wouldn't automatically give them a new one. hmmmm .... I am sure there is another way.
ChadHow can I set up a router to automatically disconnect connections after so long?
Hmm.. I had the problem that my DSL Modem was left switched on all the time and everyday the router would stop responding because my ISP reset my connection..
I fixed it by getting one of those timers that turn power on and off, and setting it to switch the router off for a few mins in the middle of the night when I was asleep..
Timer 拢3 or new router 拢60!
Satisfaction at beating our ISP.. Priceless!
How to get wired internet to a laptop without a router.?
Im getting a laptop soon and I dont wanna fuss with a router or a wireless connect card. And im only planning on keeping it in one room most of the time, can I just hook it up to a cable and get internet?How to get wired internet to a laptop without a router.?
All you need, is to run an Ethernet cable from the modem to the laptop.How to get wired internet to a laptop without a router.?
plug ethernet cable into slot provided on laptop. If wire was connected to something else prior then reset modem. to reset modem unplug modem and leave it unplugged for 1-5 minutes. plug it back in and wait for lights to begin flashing the way they were before you started messing with it.
If you are gonna buy internet, you will be given a modem, which has only one spot for wired internet. So if you are the only one that will be using it, then you can just connect it with a wire and there you go.
You can install a second ethernet card (NIC) on your main computer and use Internet Conneciton Sharing in Windows.
All you need, is to run an Ethernet cable from the modem to the laptop
All you need, is to run an Ethernet cable from the modem to the laptop.How to get wired internet to a laptop without a router.?
plug ethernet cable into slot provided on laptop. If wire was connected to something else prior then reset modem. to reset modem unplug modem and leave it unplugged for 1-5 minutes. plug it back in and wait for lights to begin flashing the way they were before you started messing with it.
If you are gonna buy internet, you will be given a modem, which has only one spot for wired internet. So if you are the only one that will be using it, then you can just connect it with a wire and there you go.
You can install a second ethernet card (NIC) on your main computer and use Internet Conneciton Sharing in Windows.
All you need, is to run an Ethernet cable from the modem to the laptop
How to transfer information from my router to my flash drive?
I have a router and i cannot figure out how to transfer my router information to my flash drive. Please if you can help me please do........How to transfer information from my router to my flash drive?
What kind of router do you have?
What kind of router do you have?
How do I block a specific computer from my wireless router?
I live in an apartment complex and I have password security on the wifi already, but one of my roommates keeps giving the password to a neighbor girl he's desperately trying to get with and tells her the password every time I change it. How do I block her computer from router access even if she has the password? Is it possible to do without direct access to the computer?How do I block a specific computer from my wireless router?
You could do this by MAC filtering in your wireless router. Every wireless adapter has a MAC code - you can find out your own by opening a command prompt (run CMD) and in the command window, type ipconfig /all and hit enter.
Look for the MAC code (will be called physical address and will be 6 pairs of characters) of your wireless adapter and write it down. In your router settings enable MAC filtering and add your MAC code - set it to enable/allow if that is in the settings. Repeat for each laptop you want to allow and save settings if necessary.
Now no other laptop with an unknown MAC code can access your network as it restricts to only the ones you have entered. Of course if your roommate finds out her MAC code and adds it into the router himself you'll be back to square 1...How do I block a specific computer from my wireless router?
Whitelist only your MAC addresses so no one else can access it.short hair styles
You could do this by MAC filtering in your wireless router. Every wireless adapter has a MAC code - you can find out your own by opening a command prompt (run CMD) and in the command window, type ipconfig /all and hit enter.
Look for the MAC code (will be called physical address and will be 6 pairs of characters) of your wireless adapter and write it down. In your router settings enable MAC filtering and add your MAC code - set it to enable/allow if that is in the settings. Repeat for each laptop you want to allow and save settings if necessary.
Now no other laptop with an unknown MAC code can access your network as it restricts to only the ones you have entered. Of course if your roommate finds out her MAC code and adds it into the router himself you'll be back to square 1...How do I block a specific computer from my wireless router?
Whitelist only your MAC addresses so no one else can access it.
How do I connect to my router without going on the internet?
I may have messed up some of the properties on my router so now I can't get on to the internet, but if I was able to access my router I could change all that back. The problem is I can't access it without going on the internet, right? I think I changed the obtain ip address automatically to static ip address. Now I cannot connect to my normal network. Please help.How do I connect to my router without going on the internet?
You're a little confused.
Forget what you're thinking, because it's not the right way of thinking about it.
What you need to do is the following:
Find the little reset button on your router -- its probably on the back and you may need to use the point of a ball point pen to fit in the hole where the switch is located to push it.
Now, press and hold that reset button for about 30 seconds to reset your router back to factory defaults.
This is about the only way you're going to get back on to your router.
Good Luck!
Annorax64How do I connect to my router without going on the internet?
hiya no you have to be on the internet .. however the easiest way to sort things out is ring up your isp provider and ask them to reset your settings.. or we found that ringing up like netgear or belkini who ever made your router are more knowledable, we rang out telephone company and they were useless to be polite, we rang netgear in america local call from uk and they were brilliant.
You're a little confused.
Forget what you're thinking, because it's not the right way of thinking about it.
What you need to do is the following:
Find the little reset button on your router -- its probably on the back and you may need to use the point of a ball point pen to fit in the hole where the switch is located to push it.
Now, press and hold that reset button for about 30 seconds to reset your router back to factory defaults.
This is about the only way you're going to get back on to your router.
Good Luck!
Annorax64How do I connect to my router without going on the internet?
hiya no you have to be on the internet .. however the easiest way to sort things out is ring up your isp provider and ask them to reset your settings.. or we found that ringing up like netgear or belkini who ever made your router are more knowledable, we rang out telephone company and they were useless to be polite, we rang netgear in america local call from uk and they were brilliant.
Subscribe to:
Posts (Atom)